MICROWAVE REPAIR, CHARLOTTE, NC
Microwave running but food stays cold? Same-day microwave repair in Charlotte, NC by local, licensed technicians. We work on every major brand and fix most microwaves in a single visit.
Get Free Quote

Licensed, insured & background-checked

Most repairs completed the same day

Samsung, LG, Whirlpool, GE & more

Written quote before any work begins
From over-the-range and built-in models to microwave drawers and convection combo units, our Charlotte technicians repair every type of microwave. We carry the most common microwave parts on the truck, so most jobs are finished same-day, in one visit.
A broken microwave throws off the whole kitchen routine: leftovers that come out cold in the middle, a turntable that stops turning, a keypad that ignores every button, or sparks flashing inside the cavity. For over-the-range models, a failure can also take out the vent fan and cooktop light above your stove. The good news is that most microwave problems are more common than homeowners realize, and the vast majority can be fixed the same day with an accurate diagnosis and the right parts on hand. Across Charlotte homes, we see the same issues again and again: microwaves that run but don't heat, units that won't start when the door is closed, sparking or burning smells, dead touchpads, and vent fans or lights that stop working.
When you call FM Appliance, you get a straight answer instead of a sales pitch. Microwaves store high voltage even after they're unplugged, so these repairs are not a safe DIY job. Our licensed, background-checked technicians are trained on every major microwave brand, so they safely track down the real cause, whether it's a magnetron, high-voltage diode, capacitor, door switch, thermal fuse, turntable motor, keypad or control board. You get a firm price before any work begins, and most microwave repairs are completed in a single visit, backed by our parts-and-labor warranty.

Call now and talk to a real person. Most dishwasher repairs in Charlotte are booked within hours, not days.
Service area:
CHARLOTTE & THE CAROLINAS
Mon–Sat:
8:00AM–6:00PM
A microwave is one of those appliances you don't think about until it quits. You press start and hear it hum, but the food comes out just as cold as it went in. Or the turntable stops spinning, the keypad won't respond, or sparks flash inside the cavity and you're left wondering if it's safe to use at all. At FM Appliance, we help Charlotte homeowners get their kitchens running smoothly again without the wait. Most customers see a technician within 24 hours of calling, often after other companies said they couldn't come out, and most microwave repairs are finished during that first appointment, Monday through Saturday.
Microwaves store high voltage even when they're unplugged, so a proper diagnosis isn't just good practice, it's a safety issue.
Our licensed, insured and background-checked technicians test each component safely to locate the real fault, whether it's a failed magnetron, a blown high-voltage diode, a faulty door switch, a worn turntable motor or a control board that's stopped responding. They work on over-the-range, built-in and drawer microwaves from brands like Whirlpool, GE, Samsung, LG, KitchenAid and Sharp. You'll get a clear explanation of what went wrong and a firm written price before any work is done. The flat diagnostic fee is applied to your repair if you decide to go ahead, and customers frequently tell us our pricing came in below other local quotes. And if you have a basic countertop model where replacing it would cost less than repairing it, we'll tell you that honestly rather than sell you a repair you don't need.
The reviews our technician Frank receives keep pointing to the same qualities: he's skilled, careful and genuinely respectful of the homes he works in. Customers notice that he removes his shoes before coming in and leaves the kitchen clean when he's done, which is especially welcome when an over-the-range microwave has to come down off the wall. Every microwave repair is backed by our parts-and-labor warranty, and if the same problem shows up again while you're covered, we'll come back and repair it at no cost to you. It's a big part of why more than 5,000 homeowners across the Carolinas count on FM Appliance, and why so many come back to us whenever another appliance needs attention.

The magnetron is the part that actually generates heat, and when it fails your microwave still runs but leaves food cold. We test the magnetron, high-voltage diode, and capacitor, then replace whatever is drawing the unit down so it heats evenly again instead of just spinning.

Sparks inside the cavity usually mean a burnt waveguide cover, a failing diode, or damage to the interior walls. Left alone it gets worse fast and can destroy the magnetron. We find the source, replace the damaged parts, and make sure the inside is safe to run again.

A plate that won't turn leaves food half-cooked and unevenly heated. The cause is almost always a worn turntable motor, a stripped drive coupler, or a broken roller guide. We pinpoint which one and restore smooth, quiet rotation.

Grinding, buzzing, or rattling points to a tired cooling fan, a failing motor, or a loose internal part knocking around. We track down the noise at its source and replace the worn component before it takes out something more expensive.

A dead microwave can come from a blown thermal fuse, a faulty door interlock switch, a bad control board, or a power supply fault. We run a full electrical diagnostic to find exactly where the circuit breaks and get it powering up reliably.

When the keypad ignores you or only some buttons respond, the membrane switch or control panel is usually failing. We repair or replace unresponsive touchpads and control panels so every setting works the way it should.

Need an appliance repair company in Charlotte you can trust? FM Appliance repairs all major brands, usually the same day you call, with upfront pricing and a parts-and-labor warranty. See our services below.

Reach out any time we respond fast and get you scheduled quickly.

Reach out any time we respond fast and get you scheduled quickly.

Reach out any time we respond fast and get you scheduled quickly.

Reach out any time we respond fast and get you scheduled quickly.

Reach out any time we respond fast and get you scheduled quickly.

Reach out any time we respond fast and get you scheduled quickly.

Reach out any time we respond fast and get you scheduled quickly.

Reach out any time we respond fast and get you scheduled quickly.
Same-day appliance repair across the Charlotte metro, including York and Lancaster counties in South Carolina. Tap your city for local service details.
Don't see your town? We cover surrounding communities too — call and
we'll confirm same-day availability.
If the display works but the microwave won't start, the most likely cause is a faulty door switch or a broken door latch. A blown fuse, tripped thermal cutoff or failed control board can also stop it from running. Our Charlotte technicians can diagnose and fix most of these problems in one visit.
A dead or unresponsive keypad usually points to a worn touchpad, a failed control board or a blown internal fuse. Before calling, check whether the circuit breaker has tripped. If the display is blank and the breaker is fine, the unit needs a professional diagnosis.
A turntable that stops spinning is usually caused by a worn turntable motor, a broken coupler or a roller guide that has slipped out of place. Make sure the glass tray is seated correctly first. If it still won't turn, the motor is an affordable part to replace.
Some hum is normal, but a loud buzz or rattle often points to a failing magnetron, high-voltage diode, cooling fan or turntable motor. A grinding sound from an over-the-range model usually comes from a worn vent fan motor. New or louder noises are worth having checked before the part fails completely.
A microwave that trips the breaker may have a shorted high-voltage component, a faulty door switch or a failing magnetron. It can also happen if the microwave shares a circuit with other high-power appliances. Stop using it and have it inspected, since repeated tripping can signal an electrical fault.
Vent fan problems are often caused by a grease-clogged fan motor, a faulty fan switch or a control board issue. A light that won't turn on usually needs a new bulb or socket. We repair both, so your cooktop stays properly ventilated.
Call now and speak to a real person. Most microwave repairs are booked within hours, not days. Same-day microwave repair across Charlotte, Mon–Sat.